[Help] Murloc Hut edit, model attached!

I would like the murloc hut so that the straw-roofing is replaced with a leafy covering. I assume that this would require a model edit to add ALL parts of the leafy texture are attached.

So, what I need is:
- Remove the yellow straw-roof
- Replace the yellow straw roof with the leaves on the given texture
- I want the leaves to be attached with red on the bottom, yellow middle, green top
- That means ALL the leaves are to be used, no other part of the tree texture
- Model filesize to take no more than 30kb (squish it if needed), or at least some sort of reason why it can't be made any lower (seeing as the original is only 14ish)

If that isn't enough, pictures should be more helpful:



If you need original paths:
Murloc Hut: buildings\other\MurlocHut0\MurlocHut0.mdl
Barrens Tree Texture: ReplaceableTextures\BarrensTree\BarrensTree\BarrensTree.blp

The purpose of this model is to act as a tower for defense.

Thanks ahead!

here it is

I should have been more specific, it should be ONE model with LAYERED leaves as mentioned - green, yellow, red going from top to bottom. These are good, but not what I need.

EDIT!
Also, that model makes a huge flash when it dies. I think one of the light emitters went nuts.

ah ok. I will fix it in some hours^^

This is actually a very nice idea!

ok here it is ^^

Now THAT'S cool. Heh, it seems to be a tad popular, too.

Much deserved +rep.

EDIT!
Hehehe I just gave your second green...

Alrighty, it turns out I need another one of these. I need a crystal-themed one.

So replace the straw cap, like last time, with a crystal cap just like the crystal model, but I need a "base" so that it's not totally transparent.

Crystal-type texture attached, crystal-to-aim-for-style attached.

Bump

Also, make sure it's a blue-crystal theme, not a wintery-snow theme.

That probably isn't what you meant, or need, but here you go(if anything needs fixing, feel free to ask):

EDIT: Second version included.

The blue one is on target, but it's more of an umbrella than a crystal cap.

Oky dude, so, how you want it to be? I mean, thats the normal Murloc hut with crystal opaque texture, isn't it what you wanted? Anyways, i will fix, if you will tell me what needs fixing. I mean, what shape you want it to have? Perhaps a drawing will help.

Just like the first one, a small mushroom-like cap as before. If that crystal wasn't enough reference, I'm not sure if it was erwt's, but there's a crystal golem model somewhere. It's got a second layer of glossy texture to it.

Hmm, i simply changed the texture on the cap to the CrystalOpaque one, but okay, I'll try.

EDIT: Okay, here goes. I added a "crystal" effect, like on the Crystal Golem's. Olof made a tut about it. 2 versions included.

Hm, I can use the first one, the fluoro one, I'll just tint it accordingly. Thanks!
+Rep